Description:

Effervescent Tablet tube filling and capping machine is applicable to the packing of big and thin tablets which are orderly fill into bobbin bottles in single row in an overlapping way. World famous brand parts and electrical components were used for the device, it adopts high precise indexing mechanism, speed regulating motor, stepping motor, photoelectric sensor, proximity switch and PLC centralized control. It can automatically give alarms and shut down in case of no tablets, bottles or covers, and also can remove the bottle with no enough tablets or did not capping good enough.

All components that touch with the tablets is made of superior 316 stainless steel, which totally meets the GMP requirement. Thus, it is the suitable device for pharmaceutical factories, health product factories and food factories to pack effervescent tablets esp. Vitamin C, calcium and other products and so on.

  • It was designed for layered filling of tablets into a tube and then placing a plastic cap on the top.
  • Comply with  European Union CE certification.
  • Loading the tubes by automatic system.
  • Loading the tubes by automatic system.
  • Automatic tube feeder and tablet channel Counting.
  • No tube, no filling; No tablets, no capping.
  • Automatic cap press sealing.
  • Detection and rejection if less filling.
  • Siemens PLC control system.
Tablet Diameter
Ø12~Ø30mm
Tablet Thickness
3mm~8mm
Capacity
50-60 Bottles / min
Tablet Amount
8-30 PCS / Bottles
Voltage/Frequency
220V / 50HZ,60HZ
Power
2.5KW
Air Pressure/Volume
0.6Mpa , 0.28 m³/min
Outline Dimensions
3300*2000*1750mm